Inverters

All inverters are programmed to charge batteries.
All inverters are bi-directional and can accept a generator or Eskom.
All inverters are fully programmable, and all system information is available on the inverter display.

1kw, 2kw, 3kw and 5kw Pure Sine Wave Inverters

New

Microcare Inverters have been made in South Africa for the last 20 years. During this period J&J has manufactured and sold thousands of inverters locally and internationally. The technology has been upgraded and the current range of inverters use High Frequency Pulse Width Modulation (PWM) to regulate the output of the inverter. The updated circuitary allows for smaller units and more cost effective quality performance. The inverters are pure sine wave with very low distortion and good regulation. The units incorporate battery low, overload, lightning protection, load sensing and LCD display as standard. Service and repair of the inverters at a minimum cost due to local manufacture.

Features:

Available for 12v/24v/36v/48v and 96v dc systems
Out put power from 1kw – 10kw
Available in 3 phase (subject to special order)
LCD Display
Low idle current
High Surge capacity for motor start
Timed Overload capacity with Auto-Shutdown
3 Attempt Auto Restart
Protection against short circuits
Locally manufactured
Minimum Service Turnaround
Fan cooling for optimum performance
Audible Buzzer indicating faults and overload conditions
1 Year Warranty

Specifications

Details		1kw		2kw	3kw	5kw
	Model no	mcin-1kw-12/24/36/48		mcin-2kw-12/24/36/48	mcin-3kw-24/36/48	mcin-5kw-36/48
OUTPUT	AC Voltage	230v		230v	230v	230v
	AC Amps	5		10	15	25
	Rated Power	1000w		2000w	3000w	5000w
	Surge Power	200%
	Waveform	Sine Wave
	AC Regulation	±3%
	THD	< 3%
	Frequency	50Hz±1%
	Display	LCD
INPUT	DC Voltage	12/24/36/48	12/24/36/48		24/36/48		36/48
	DC Amps Max	100/50/33/25	200/100/66/50		150/100/75		180/125
	Voltage Range	10v-14v / 20v-32v / 30v-48v / 40v-60v /
	Efficiency(typical)	>80%
	DC Connector	Battery Cables
	Fuse	Internal Fuses
Protection	Batt Low Alarm	Yes
	Batt Low Shutdown	Yes
	Over Load	120%/3min 150%/1min 200%/30sec
	Over Voltage	Auto Shutdown
	Over Temperature	Auto Shutdown and Reset
	Output Short	Auto Shutdown and 3 attempt Reset
	Cooling	Fan controlled
Environment	Working Temp	0-40°

10kw 48v Pure Sine Wave Inverters

microcare 10kw Microcare Inverters have been made in South Africa for the last 20 years. During this period J&J has manufactured and sold thousands of inverters locally and internationally. The technology has been upgraded and the current range of inverters use High Frequency Pulse Width Modulation (PWM) to regulate the output of the inverter. The updated circuitary allows for smaller units and more cost effective quality performance. The inverters are pure sine wave with very low distortion and good regulation. The units incorporate battery low, overload, lightning protection, load sensing and LCD display as standard. Service and repair of the inverters at a minimum cost due to local manufacture.

Features:

Auto Load Sensing
LCD Display
Low idle current
High Surge capacity for motor start
Timed Overload capacity with Auto-Shutdown
3 Attempt Auto Restart
Protection against short circuits
Locally manufactured
Minimum Service Turnaround
Fan cooling for optimum performance
Audible Buzzer indicating faults and overload conditions
1 Year Warranty

Specifications

Details		10kw
OUTPUT	Model no	mcin-10kw-48
	AC Voltage	230v
	AC Amps	45amps
	Rated Power	10 000w
	Surge Power	200%
	Waveform	Sine Wave
	AC Regulation	±3%
	THD	< 3%
	Frequency	50Hz±1%
	Display	4 X line LCD
INPUT	DC Voltage	48
	DC Amps Max	250
	Voltage Range	42v – 60v
	Efficiency(typical)	>85%
	DC Connector	Bolts
	Fuse	2amp
Protection	Batt Low Alarm	Yes
	Over Load	120%/3min 150%/1min 200%/30sec
	Over Voltage/Under Voltage	Auto Shutdown
	Over Temperature	Auto Shutdown and Reset
	Output Short	Auto Shutdown and 3 attempt Reset
	Cooling	Fan controlled
Environment	Working Temp	0-40°