Search this site

Contact Us

49 Strang St
Port Elizabeth
6001
041 453 5761
This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Inverters

  • All inverters are programmed to charge batteries.
  • All inverters are bi-directional and can accept a generator or Eskom.
  • All inverters are fully programmable, and all system information is available on the inverter display. 

1kw, 2kw, 3kw and 5kw Pure Sine Wave Inverters

 

10kw 48v inverter

microcare downloadMicrocare Inverters have been made in South Africa for the last 20 years. During this period J&J has manufactured and sold thousands of inverters locally and internationally. The technology has been upgraded and the current range of inverters use High Frequency Pulse Width Modulation (PWM) to regulate the output of the inverter. The updated circuitary allows for smaller units and more cost effective quality performance. The inverters are pure sine wave with very low distortion and good regulation. The units incorporate battery low, overload, lightning protection, load sensing and LCD display as standard. Service and repair of the inverters at a minimum cost due to local manufacture.

 

 

 

Features:

  • Available for 12v/24v/36v/48v and 96v dc systems
  • Out put power from 1kw – 10kw
  • Available in 3 phase (subject to special order)
  • LCD Display
  • Low idle current
  • High Surge capacity for motor start
  • Timed Overload capacity with Auto-Shutdown
  • 3 Attempt Auto Restart
  • Protection against short circuits
  • Locally manufactured
  • Minimum Service Turnaround
  • Fan cooling for optimum performance
  • Audible Buzzer indicating faults and overload conditions
  • 1 Year Warranty

Specifications

Details 1kw 2kw 3kw 5kw
  Model no mcin-1kw-12/24/36/48 mcin-2kw-12/24/36/48 mcin-3kw-24/36/48 mcin-5kw-36/48
OUTPUT AC Voltage 230v 230v 230v 230v
  AC Amps 5 10 15 25
  Rated Power 1000w 2000w 3000w 5000w
  Surge Power 200%
  Waveform Sine Wave
  AC Regulation ±3%
  THD < 3%
  Frequency 50Hz±1%
  Display LCD
INPUT DC Voltage 12/24/36/48 12/24/36/48 24/36/48 36/48
  DC Amps Max 100/50/33/25 200/100/66/50 150/100/75 180/125
  VoltageRange 10v-14v   /   20v-32v   /   30v-48v   /   40v-60v   /
  Efficiency(typical) >80%
  DC Connector BatteryCables
  Fuse Internal Fuses
Protection Batt Low Alarm Yes
  Batt Low Shutdown Yes
  Over Load 120%/3min          150%/1min          200%/30sec
  Over Voltage Auto Shutdown
  Over Temperature Auto Shutdown and Reset
  Output Short Auto Shutdown and 3 attempt Reset
  Cooling Fan controlled
Environment Working Temp 0-40°

 

10kw 48v Pure Sine Wave Inverters  microcare download

microcare 10kwMicrocare Inverters have been made inSouth Africa for the last 20 years. During this period J&J has manufactured and sold thousands of inverters locally and internationally. The technology has been upgraded and the current range of inverters use High Frequency Pulse Width Modulation (PWM) to regulate the output of the inverter. The updated circuitary allows for smaller units and more cost effective quality performance. The inverters are pure sine wave with very low distortion and good regulation. The units incorporate battery low, overload, lightning protection, load sensing and LCD display as standard. Service and repair of the inverters at a minimum cost due to local manufacture.

 

Features:

  • Auto Load Sensing
  • LCD Display
  • Low idle current
  • High Surge capacity for motor start
  • Timed Overload capacity with Auto-Shutdown
  • 3 Attempt Auto Restart
  • Protection against short circuits
  • Locally manufactured
  • Minimum Service Turnaround
  • Fan cooling for optimum performance
  • Audible Buzzer indicating faults and overload conditions
  • 1 Year Warranty

Specifications

Details 10kw
OUTPUT Model no mcin-10kw-48
  AC Voltage 230v
  AC Amps 45amps
  Rated Power 10 000w
  Surge Power 200%
  Waveform Sine Wave
  AC Regulation ±3%
  THD < 3%
  Frequency 50Hz±1%
  Display 4 X line LCD
INPUT DC Voltage 48
  DC Amps Max 250
  VoltageRange 42v – 60v
  Efficiency(typical) >85%
  DC Connector Bolts
  Fuse 2amp
Protection Batt Low Alarm Yes
  Over Load 120%/3min          150%/1min          200%/30sec
  Over Voltage/Under Voltage Auto Shutdown
  Over Temperature Auto Shutdown and Reset
  Output Short Auto Shutdown and 3 attempt Reset
  Cooling Fan controlled
Environment Working Temp 0-40°